nixos/configuration.nix

# Edit this configuration file to define what should be installed on your system.  Help is available in the
# configuration.nix(5) man page and in the NixOS manual (accessible by running ‘nixos-help’).
{
  config,
  pkgs,
  pkgs-stable,
  inputs,
  ...
}: {
  imports = [
    # Include the results of the hardware scan.
    /etc/nixos/hardware-configuration.nix
    ./packet-tracer.nix
  ];

  # Bootloader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;

  # Use latest kernel.
  boot.kernelPackages = pkgs.linuxPackages_latest;
  networking.hostName = "ArcticFox"; # Define your hostname.
  # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.

  # Configure network proxy if necessary networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
  #####################
  ## NETWORKING
  #####################

  # Enable networking
  networking.networkmanager.enable = true;

  networking.wg-quick.interfaces = {
    wg0 = {
      address = [
        "10.0.1.8/32"
      ];
      peers = [
        {
          allowedIPs = [
            "10.0.1.1/24"
          ];
          endpoint = "bruynooghe.dev:51820";
          publicKey = "uHP+JhuLp8pcvup6V0LdFyDKsWV3kMD+CeEpqaD8Ag4=";
        }
      ];
      privateKey = "0ODqC4gxhLvRy5poqRGOx5wtOmtgN6NatcfsEpcGw1c=";
    };
  };

  hardware.bluetooth = {
    enable = true;
    powerOnBoot = true;
    settings = {
      General = {
        # Shows battery charge of connected devices on supported
        # Bluetooth adapters. Defaults to 'false'.
        Experimental = true;
        # When enabled other devices can connect faster to us, however
        # the tradeoff is increased power consumption. Defaults to
        # 'false'.
        FastConnectable = true;
      };
      Policy = {
        # Enable all controllers when they are found. This includes
        # adapters present on start as well as adapters that are plugged
        # in later on. Defaults to 'true'.
        AutoEnable = true;
      };
    };
  };

  # Set your time zone.
  time.timeZone = "Europe/Brussels";

  # Select internationalisation properties.
  i18n.defaultLocale = "en_US.UTF-8";

  # Enable the X11 windowing system. You can disable this if you're only using the Wayland session.
  services.xserver.enable = true;
  services.xserver.enableTCP = true;
  # Enable the KDE Plasma Desktop Environment.
  services.displayManager.sddm.enable = true;
  services.displayManager.sddm.wayland.enable = true;
  services.desktopManager.plasma6.enable = true;

  #hyprland
  programs.hyprland.enable = true;
  programs.hyprland.xwayland.enable = true;
  #programs.uwsm.enable = true;
  #programs.hyprland.withUWSM = true;

  environment.sessionVariables.NIXOS_OZONE_WL = "1";

  # Configure keymap in X11
  services.xserver.xkb = {
    layout = "us";
    variant = "";
  };

  # Enable CUPS to print documents.
  services.printing.enable = true;

  # Enable sound with pipewire.
  services.pulseaudio.enable = false;
  security.rtkit.enable = true;
  services.pipewire = {
    enable = true;
    alsa.enable = true;
    alsa.support32Bit = true;
    pulse.enable = true;
    # If you want to use JACK applications, uncomment this
    jack.enable = true;

    # use the example session manager (no others are packaged yet so this is enabled by default, no need to
    # redefine it in your config for now)
    wireplumber.enable = true;
  };

  # Enable touchpad support (enabled default in most desktopManager). services.xserver.libinput.enable = true;

  ##################
  ## USERS
  ##################

  # Define a user account. Don't forget to set a password with ‘passwd’.
  users.users = let
    defaultUser = {
      isNormalUser = true;
      description = "Default user";
      extraGroups = ["networkmanager" "wheel" "openrazer"];
      packages = with pkgs; [
        kdePackages.kate
        thunderbird
        pkgs-stable.rustdesk-flutter
      ];
    };
  in {
    sarah = defaultUser // {description = "Sarah";};
    emily = defaultUser // {description = "Emily";};
    larra = defaultUser // {description = "Larra";};
    lizzy = defaultUser // {description = "DA GF";};
  };

  # Allow unfree packages
  nixpkgs.config.allowUnfree = true;
  ###################
  ## SYSTEM PACKAGES
  ###################

  # List packages installed in system profile. To search, run: $ nix search wget
  environment.systemPackages = with pkgs; [
    # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. wget steam alacritty
    libva-utils
    pkgs-stable.vesktop
    git
    tealdeer
    bat
    hyfetch
    neofetch
    fastfetch
    macchina
    kitty
    hyprpaper
    hyprpanel
    btop
    lm_sensors
    liquidctl
    polychromatic
    openrazer-daemon
    vscode-fhs
    jetbrains.rust-rover
    rustup
    rustc
    cargo
    gcc
    vulkan-headers
    lld
    mold
    vulkan-loader
    vulkan-headers
    alacritty
    hyprpanel
    krita
    fish
    wofi
    yadm
    variety
    inputs.zen-browser.packages."${system}".default
    kdePackages.kdenlive
    obsidian
    fish
    fishPlugins.done
    fishPlugins.fzf-fish
    fishPlugins.forgit
    fishPlugins.hydro
    fzf
    fishPlugins.grc
    grc
    oh-my-posh
    pyenv
    swww
    ags
    chromium
    gcc
    gamescope-wsi
    mesa
    grimblast
    godot
    yt-dlp
    strawberry
    gamemode
    thunar
    alejandra
    wineWowPackages.stagingFull
    winetricks
    python3
    protonup-qt
    zig
    jq
    python313Packages.ipython
    geogebra
    ciscoPacketTracer8
  ];

  fonts.enableDefaultPackages = true;
  fonts.packages = with pkgs; [
    nerd-fonts.victor-mono
  ];

  #################
  ## programs
  #################

  # STEAM
  programs.steam = {
    enable = true;
    remotePlay.openFirewall = true;
    localNetworkGameTransfers.openFirewall = true;
    gamescopeSession.enable = true;
    protontricks.enable = true;
    protontricks.package = pkgs-stable.protontricks;
  };

  programs.gamescope.enable = true;

  # other
  programs.firefox.enable = true;
  programs.neovim.enable = true;
  programs.git = {
    enable = true;
    config.user = {
      name = "Larra Emily Sarah";
      email = "larra.vanloon@gmail.com";
    };
    config.init.defaultBranch = "main";
  };

  programs.fish.enable = true;
  services.gvfs.enable = true;

  # Some programs need SUID wrappers, can be configured further or are started in user sessions.
  # programs.mtr.enable = true; programs.gnupg.agent = {
  #   enable = true; enableSSHSupport = true;
  # };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  services.openssh.enable = true;

  # Open ports in the firewall. networking.firewall.allowedTCPPorts = [ ... ]; networking.firewall.allowedUDPPorts
  # = [ ... ]; Or disable the firewall altogether. networking.firewall.enable = false;

  #################################
  ## versioning upgrading cleanup
  #################################

  # This value determines the NixOS release from which the default settings for stateful data, like file locations
  # and database versions on your system were taken. It‘s perfectly fine and recommended to leave this value at
  # the release version of the first install of this system. Before changing this value read the documentation for
  # this option (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "25.05"; # Did you read the comment? system.autoUpgrade.enable = true;
  system.autoUpgrade = {
    enable = true;
    dates = "weekly";
    flake = "path:/home/sarah/flakes";
    flags = [
      "--update-input"
      "nixpkgs"
      "--commit-lock-file"
      "--impure"
    ];
  };

  programs.git.config.safe.directory = "path:/home/sarah/flakes";

  # auto cleanup
  nix.gc = {
    automatic = true;
    dates = "weekly";
    options = "--delete-older-than 20d";
  };
  nix.settings.auto-optimise-store = true;

  #############
  ### hardware
  #############

  # everything amd gpu
  hardware.graphics.enable32Bit = true;
  hardware.graphics.extraPackages = [
    pkgs.rocmPackages.clr.icd
    pkgs.libva
  ];

  boot.initrd.kernelModules = ["amdgpu"];
  boot.kernelModules = ["amdgpu"];
  hardware.amdgpu.overdrive.ppfeaturemask = "0xffffffff";

  services.hardware.openrgb.enable = true;
  hardware.openrazer = {
    enable = true;
    users = ["sarah"];
  };

  services.xserver.videoDrivers = ["amdgpu"];

  environment.variables = {
    SUDO_EDITOR = "nvim";
  };

  nix.settings.experimental-features = ["nix-command" "flakes"];
}